:: ESERFLEKS ::

Floor : The application floor should be strong, dry, free of damp, and dust and sand must be removed. PVC tiles may also be applied to marble.

Weather Conditions: Moisture content of the place where the tiles are to be applied must not be under 60 . Room temperature must be higher than 10°C. In winter, please apply the tiles by having them flexed at the corners. After spreading the acrylic based adhesive on the floor through notched tile trowel, please wait 20-30 minutes until it gains mastic density and then start the application. If the adhesive does not have mastic density, this may be due to two reasons: the floor may be damp or the moisture content of the air may be high. You may move to the floor immediately after the adhering process has finished..

Adhesives : Acrylic based white adhesives, especially 'Desen Tut', must be used. Wipe off the adhesive overflowing from the space between tiles with a moist cloth before it dries. Use 400gr/m2 adhesive for 1m2 tile.
Other Equipments : Notched tile trowel, sharp-point maquette knife and pencil.
Specifiations :PVC, Plastifian oils colors , PVC Film (FOLIO)
Maintenance and Protection :To keep the tiles as if they are brand-new, sand and dust must removed from their surfaces via water and proper cleanser. Regular cleaning made as such will lengthen the useful life of tiles. Please use protective for furniture and goods legs. It is shock and scratch resistant.